Millwright
The line startsStation 0102030405 / 05
On the floor
The machinesthat do it.
Every machine on the floor with its work envelope, the tolerance it holds and how many of them run two shifts.
- 14Spindles
- 2Shifts
- 6Machine types
On the floor
The machinesthat do it.
Every machine on the floor with its work envelope, the tolerance it holds and how many of them run two shifts.
- 14Spindles
- 2Shifts
- 6Machine types
On the floor
The machinesthat do it.
Every machine on the floor with its work envelope, the tolerance it holds and how many of them run two shifts.
- 14Spindles
- 2Shifts
- 6Machine types
The machine list
Every machineand what it holds.
Envelope, tolerance and how many of each stand on the floor. If your part fits the table, it fits the shop.
Showing 06 / 06 machines
Milling
Prismatic parts from a 20 mm bracket to a one-metre housing, finished in as few setups as the drawing allows.
02 machines× 9 On the floor
Machine 01×6Milling5-axis machining centre
Complex housings finished in a single setup.
Specification: 5-axis machining centre Envelope 800 × 650 × 500 mm Tolerance ±0.005 mm On the floor × 6 
Machine 02×3MillingHorizontal machining centre
Twin pallets run series parts through the night.
Specification: Horizontal machining centre Envelope 1,050 × 900 × 900 mm Tolerance ±0.008 mm On the floor × 3
Turning
Shafts, flanges and bushes turned and milled in one cycle, bar-fed for series work.
01 machine× 5 On the floor
Machine 03×5TurningMill-turn lathe
Shafts and flanges turned, milled and drilled in one cycle.
Specification: Mill-turn lathe Envelope Ø 420 × 1,500 mm Tolerance ±0.006 mm On the floor × 5
Fabrication
Sheet and plate cut, formed and welded into frames, trays and gear cases up to six metres.
02 machines× 4 On the floor
Machine 04×2FabricationFibre laser cutter
6 kW of cutting power with automatic sheet loading.
Specification: Fibre laser cutter Envelope 4,000 × 2,000 mm, to 25 mm Tolerance ±0.1 mm On the floor × 2 
Machine 05×2FabricationRobotic welding cell
Repeatable MIG seams on frames and trays.
Specification: Robotic welding cell Envelope 6,000 × 2,200 mm Tolerance ±0.5 mm On the floor × 2
Inspection
A lab at 20 °C in the middle of the floor: nothing ships on a promise.
01 machine× 3 On the floor
Machine 06×3InspectionCoordinate measuring machine
Every first article, and every batch after it.
Specification: Coordinate measuring machine Envelope 1,200 × 1,000 × 800 mm Tolerance 1.8 µm On the floor × 3
The machine list
Every machineand what it holds.
Envelope, tolerance and how many of each stand on the floor. If your part fits the table, it fits the shop.
Showing 06 / 06 machines
Milling
Prismatic parts from a 20 mm bracket to a one-metre housing, finished in as few setups as the drawing allows.
02 machines× 9 On the floor- Machine 01×6Milling
5-axis machining centre
Complex housings finished in a single setup.
Specification: 5-axis machining centre Envelope 800 × 650 × 500 mm Tolerance ±0.005 mm On the floor × 6 - Machine 02×3Milling
Horizontal machining centre
Twin pallets run series parts through the night.
Specification: Horizontal machining centre Envelope 1,050 × 900 × 900 mm Tolerance ±0.008 mm On the floor × 3
Turning
Shafts, flanges and bushes turned and milled in one cycle, bar-fed for series work.
01 machine× 5 On the floor- Machine 03×5Turning
Mill-turn lathe
Shafts and flanges turned, milled and drilled in one cycle.
Specification: Mill-turn lathe Envelope Ø 420 × 1,500 mm Tolerance ±0.006 mm On the floor × 5
Fabrication
Sheet and plate cut, formed and welded into frames, trays and gear cases up to six metres.
02 machines× 4 On the floor- Machine 04×2Fabrication
Fibre laser cutter
6 kW of cutting power with automatic sheet loading.
Specification: Fibre laser cutter Envelope 4,000 × 2,000 mm, to 25 mm Tolerance ±0.1 mm On the floor × 2 - Machine 05×2Fabrication
Robotic welding cell
Repeatable MIG seams on frames and trays.
Specification: Robotic welding cell Envelope 6,000 × 2,200 mm Tolerance ±0.5 mm On the floor × 2
Inspection
A lab at 20 °C in the middle of the floor: nothing ships on a promise.
01 machine× 3 On the floor- Machine 06×3Inspection
Coordinate measuring machine
Every first article, and every batch after it.
Specification: Coordinate measuring machine Envelope 1,200 × 1,000 × 800 mm Tolerance 1.8 µm On the floor × 3
The machine list
Every machineand what it holds.
Envelope, tolerance and how many of each stand on the floor. If your part fits the table, it fits the shop.
Showing 06 / 06 machines
Milling
Prismatic parts from a 20 mm bracket to a one-metre housing, finished in as few setups as the drawing allows.
02 machines× 9 On the floor- Machine 01×6Milling
5-axis machining centre
Complex housings finished in a single setup.
Specification: 5-axis machining centre Envelope 800 × 650 × 500 mm Tolerance ±0.005 mm On the floor × 6 - Machine 02×3Milling
Horizontal machining centre
Twin pallets run series parts through the night.
Specification: Horizontal machining centre Envelope 1,050 × 900 × 900 mm Tolerance ±0.008 mm On the floor × 3
Turning
Shafts, flanges and bushes turned and milled in one cycle, bar-fed for series work.
01 machine× 5 On the floor- Machine 03×5Turning
Mill-turn lathe
Shafts and flanges turned, milled and drilled in one cycle.
Specification: Mill-turn lathe Envelope Ø 420 × 1,500 mm Tolerance ±0.006 mm On the floor × 5
Fabrication
Sheet and plate cut, formed and welded into frames, trays and gear cases up to six metres.
02 machines× 4 On the floor- Machine 04×2Fabrication
Fibre laser cutter
6 kW of cutting power with automatic sheet loading.
Specification: Fibre laser cutter Envelope 4,000 × 2,000 mm, to 25 mm Tolerance ±0.1 mm On the floor × 2 - Machine 05×2Fabrication
Robotic welding cell
Repeatable MIG seams on frames and trays.
Specification: Robotic welding cell Envelope 6,000 × 2,200 mm Tolerance ±0.5 mm On the floor × 2
Inspection
A lab at 20 °C in the middle of the floor: nothing ships on a promise.
01 machine× 3 On the floor- Machine 06×3Inspection
Coordinate measuring machine
Every first article, and every batch after it.
Specification: Coordinate measuring machine Envelope 1,200 × 1,000 × 800 mm Tolerance 1.8 µm On the floor × 3
Inspection
Measured, not promised.
Every part leaves with its numbers. Touch a pin to read what the CMM measured on this housing, feature by feature.
Inspection
Measured, not promised.
Every part leaves with its numbers. Touch a pin to read what the CMM measured on this housing, feature by feature.
Inspection
Measured, not promised.
Every part leaves with its numbers. Touch a pin to read what the CMM measured on this housing, feature by feature.
Request a quote
Send the drawing.Get a quote in 24 h.
Tell us the part, the quantity and the material. An engineer reads your drawing and comes back with a price, a lead time and anything that would make the part cheaper to make.
- Quote in 24 h
- NDA before files
- No minimum order
Request a quote
Send the drawing.Get a quote in 24 h.
Tell us the part, the quantity and the material. An engineer reads your drawing and comes back with a price, a lead time and anything that would make the part cheaper to make.
- Quote in 24 h
- NDA before files
- No minimum order
Request a quote
Send the drawing.Get a quote in 24 h.
Tell us the part, the quantity and the material. An engineer reads your drawing and comes back with a price, a lead time and anything that would make the part cheaper to make.
- Quote in 24 h
- NDA before files
- No minimum order