Millwright
The line startsStation 0102030405 / 05
Capability
Assembly lines
Sub-assemblies built, wired and tested on dedicated lines.
- 3 lines
- Tested 100%
Capability
Assembly lines
Sub-assemblies built, wired and tested on dedicated lines.
- 3 lines
- Tested 100%
Capability
Assembly lines
Sub-assemblies built, wired and tested on dedicated lines.
- 3 lines
- Tested 100%
Part 01 / 04What it is
What this stationdoes for your part.
Give us the bill of materials and we build the unit: machined parts, bought-in components, wiring looms and fluid lines. Each line has its own work instructions, torque records and an end-of-line test that every unit must pass.
What you get
- 01Mechanical and electro-mechanical builds
- 02Wiring, pneumatics and hydraulics
- 03Functional test with a record per serial number
- 04Kanban or build-to-order supply
Part 02 / 04Specification
The limits,in numbers.
Outside these limits? Send the drawing anyway: we will say what we can hold before we quote.
| Materials | Aluminium, steel, stainless steel, titanium and engineering plastics |
|---|---|
| Batch size | 1 to 20,000 parts |
| Lead time | From 5 working days. Expedite on request |
| Paperwork | First article report and material certificates with every batch |
Part 03 / 04Machines
On the samefloor.
Milling× 6 on the floor5-axis machining centre
Complex housings finished in a single setup.±0.005 mm800 × 650 × 500 mm
Milling× 3 on the floorHorizontal machining centre
Twin pallets run series parts through the night.±0.008 mm1,050 × 900 × 900 mm
Turning× 5 on the floorMill-turn lathe
Shafts and flanges turned, milled and drilled in one cycle.±0.006 mmØ 420 × 1,500 mm
Part 04 / 04Projects
Part 01 / 04What it is
What this stationdoes for your part.
Give us the bill of materials and we build the unit: machined parts, bought-in components, wiring looms and fluid lines. Each line has its own work instructions, torque records and an end-of-line test that every unit must pass.
What you get
- 01Mechanical and electro-mechanical builds
- 02Wiring, pneumatics and hydraulics
- 03Functional test with a record per serial number
- 04Kanban or build-to-order supply
Part 02 / 04Specification
The limits,in numbers.
Outside these limits? Send the drawing anyway: we will say what we can hold before we quote.
| Materials | Aluminium, steel, stainless steel, titanium and engineering plastics |
|---|---|
| Batch size | 1 to 20,000 parts |
| Lead time | From 5 working days. Expedite on request |
| Paperwork | First article report and material certificates with every batch |
Part 03 / 04Machines
On the samefloor.
- Milling× 6 on the floor
5-axis machining centre
Complex housings finished in a single setup.±0.005 mm800 × 650 × 500 mm - Milling× 3 on the floor
Horizontal machining centre
Twin pallets run series parts through the night.±0.008 mm1,050 × 900 × 900 mm - Turning× 5 on the floor
Mill-turn lathe
Shafts and flanges turned, milled and drilled in one cycle.±0.006 mmØ 420 × 1,500 mm
Part 04 / 04Projects
Part 01 / 04What it is
What this stationdoes for your part.
Give us the bill of materials and we build the unit: machined parts, bought-in components, wiring looms and fluid lines. Each line has its own work instructions, torque records and an end-of-line test that every unit must pass.
What you get
- 01Mechanical and electro-mechanical builds
- 02Wiring, pneumatics and hydraulics
- 03Functional test with a record per serial number
- 04Kanban or build-to-order supply
Part 02 / 04Specification
The limits,in numbers.
Outside these limits? Send the drawing anyway: we will say what we can hold before we quote.
| Materials | Aluminium, steel, stainless steel, titanium and engineering plastics |
|---|---|
| Batch size | 1 to 20,000 parts |
| Lead time | From 5 working days. Expedite on request |
| Paperwork | First article report and material certificates with every batch |
Part 03 / 04Machines
On the samefloor.
- Milling× 6 on the floor
5-axis machining centre
Complex housings finished in a single setup.±0.005 mm800 × 650 × 500 mm - Milling× 3 on the floor
Horizontal machining centre
Twin pallets run series parts through the night.±0.008 mm1,050 × 900 × 900 mm - Turning× 5 on the floor
Mill-turn lathe
Shafts and flanges turned, milled and drilled in one cycle.±0.006 mmØ 420 × 1,500 mm
Part 04 / 04Projects
Request a quote
Send the drawing.Get a quote in 24 h.
Tell us the part, the quantity and the material. An engineer reads your drawing and comes back with a price, a lead time and anything that would make the part cheaper to make.
- Quote in 24 h
- NDA before files
- No minimum order
Request a quote
Send the drawing.Get a quote in 24 h.
Tell us the part, the quantity and the material. An engineer reads your drawing and comes back with a price, a lead time and anything that would make the part cheaper to make.
- Quote in 24 h
- NDA before files
- No minimum order
Request a quote
Send the drawing.Get a quote in 24 h.
Tell us the part, the quantity and the material. An engineer reads your drawing and comes back with a price, a lead time and anything that would make the part cheaper to make.
- Quote in 24 h
- NDA before files
- No minimum order